All I can see on a back of the tablet MODEL: MZ615 - 16.
This is UK Wi-Fi only tablet
Thanks
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
This is a discussion on MZ615 - 16 Brick need recovery.img within the Motorola Xoom 2 Development forums, part of the Motorola Xoom 2 Forum category; All I can see on a back of the tablet MODEL: MZ615 - 16. This is UK Wi-Fi only tablet Thanks...
All I can see on a back of the tablet MODEL: MZ615 - 16.
This is UK Wi-Fi only tablet
Thanks
Mine is MZ615-32
Sent from my XOOM 2 using Xparent Green Tapatalk 2
most impotently it's MZ615.
16 or 32 would probably refer to 16Gb or 32Gb model.
Would you be able to damp an image for me?
I really have nothing to loose. If that doesn't work well I've still got bricked tablet, right?
I'm not your guy sorry broI think I want to wait until HussX or RunandHide drop in, Ill notify them of this thread and have them try to help I don't want to make yours any worse or mine
No Problem Thanks for your help
just "jumping in"
you can use his Ben_J_H's img as long as both of you were/are on the same base. IE if ivasi is on HC3.2.2 and Ben_J_H is on HC3.2.2 it will work.
them partitions for the recovery img are identical in size and luck for you they both have the same MOTO SIG on them.
now here is the bad part
if ivasi was on HC3.2 and ben on hc3.2.2 then it WILL NOT WORK! as there is an update to the bootloader on the latest update.
so to restate:6if both person A) and person B) on the same model tablet (MZ615) size dose not matter and both person A and person B are on the same android system then yes it will work dd= your img and upload it.
if either parties on not on the same version DO NOT EVEN ATTEMPT!!!
it will only cause more problems
For the record I'm on 3.2.2
thanks i do appreciate your help. i think it was on latest that would be 3.2.2 right?
Double checkIf you are can somebody help me extract it? I should probally make a nandroid? How do I do that?