My mistake was that i tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img that was post on xda without worning for xoom2.
after that every reboot goes to the bootloader.
i can power on with the boot menu and choose boot normaly and all works fine!
but its not comfortable.
Hussx . i already tried that tool boot it didnt halp,,,
Last edited by eliav076; 04-09-2012 at 12:50 AM.
04-08-2012 11:45 PM
Ah well at least you don't have a bricked Xoom 2. What was the reason for flashing "recovery-Tiamat-R4c-100611-1150-cwm.img" what is it anyway?
Originally Posted by eliav076
Last edited by luke.arran; 04-09-2012 at 03:56 PM.
I Was wanted to flash polaris office...and thats all the story
Which model do you have? If you do a successful flash of the stock recovery image, it may stop booting to the flash failure screen.
Sent from my XB10.1
xoom 2 m616-16 3g
How can i get the stock recovery image file?
i will happy to try!
ok, so its not booting to bootloader screen its booting to flash failure screen, if you flash the stock img back u will be saved,
ask for someone with your exact model to do this ( needs to be rooted )
in terminal on tab or in shell from pc run
then uplaod that img from sdcard and share it. then fastboot flash recovery recovery.img to device and all will be good
dd if=/dev/block/mmcblk1p12 of=/sdcard/recovery.img
as long as that partition is the same on the xyboard and the xoom2 , if not run /proc/paritions for the partition block s and replace the mmc to the correct one
Last edited by runandhide05; 04-10-2012 at 05:15 PM.
i didnt find it
Never mind got the files from german forum. Will upload them tomorrow if you still need them
Gesendet von meinem MB860
edit: eliav076 you have a pm
Last edited by nchantmnt; 04-14-2012 at 09:08 AM.
ok thanks i flash the boot and the reboot was fix!!!
but now i have a bootloop with the motorola logo
i already tried to make a hard reset but didnt halp...