is this normal? (UK - US GED, xoom wifi)

[o2simo20]

hi all, im new to xoomforums

ok, first off i have a UK xoom, and used the info here to install the stock US 3.1 firmware, and update to the US 4.0.3 firmware. (thnks to Ben the OP btw)

it works fine, until i restart into recovery mode (pwr + volume dwn) and i get a image of an android 'laid out' with a exclamation in a triangle above it, is this normal?

also i want to install the latest Team EOS + backtrack 5 (the Team EOS rom i will need so that i can use external USB wifi dongles for packet injection, monitor mode etc)

will it work ok if i use this how-to but replace the 'recovery-Tiamat-R4c-100611-1150-cwm.img' with 'CMW Rogue Recovery v1.3.0' from here?

tia

[Ads]

[ggrant3876]

hi all, im new to xoomforums

ok, first off i have a UK xoom, and used the info here to install the stock US 3.1 firmware, and update to the US 4.0.3 firmware. (thnks to Ben the OP btw)

it works fine, until i restart into recovery mode (pwr + volume dwn) and i get a image of an android 'laid out' with a exclamation in a triangle above it, is this normal?

also i want to install the latest Team EOS + backtrack 5 (the Team EOS rom i will need so that i can use external USB wifi dongles for packet injection, monitor mode etc)

will it work ok if i use this how-to but replace the 'recovery-Tiamat-R4c-100611-1150-cwm.img' with 'CMW Rogue Recovery v1.3.0' from here?

tia

Welcome to the forum. Glad you decided to join us. Sounds like all you did was to Gedify your Xoom and not root it. The recovery you see is the stock recovery.
[HOW] Rookie Rooting, Flashing And UnRooting Under One Roof

[Astrix]

Welcome to the forum

Like Grant said

[MarkyPancake]

it works fine, until i restart into recovery mode (pwr + volume dwn) and i get a image of an android 'laid out' with a exclamation in a triangle above it, is this normal?

At this point I believe you need to press and hold the power button and then press volume up to progress to the next screen.

[o2simo20]

thnks for the info ggrant3876.

im just not sure if i can follow this how-to but use the CMW Rogue Recovery from here instead of the recovery-Tiamat-R4c-100611-1150-cwm.img from the how-to, because i dont want the recovery-Tiamat-R4c-100611-1150-cwm.img i want the latest version of CMW Rogue Recovery, so will that how-to still work, if i just use the CMW Rogue Recovery image instead of the tiamat one?

[Astrix]

Follow steps at post#1 @ rookie rooting.
- Once complete.
- Go to post#4 @ rookie rooting steps to do Nandroid back up.
- Once done
- you can follow the steps to flash the rogue recovery.

You good to go.