hello
i have just boght my xoom and updated it to android ics i was trying to flash it back to factory image to root it but it was stuck on M logo and Dual Core screen
can any one help me please ?
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
This is a discussion on my xoom stuck on red m logo within the Motorola Xoom Help forums, part of the Motorola Xoom Support Forum category; hello i have just boght my xoom and updated it to android ics i was trying to flash it back to factory image to root ...
hello
i have just boght my xoom and updated it to android ics i was trying to flash it back to factory image to root it but it was stuck on M logo and Dual Core screen
can any one help me please ?
reset it it by holding volume up and the power button at the same time.see what happens it may need a wipe.
Never Fear the iOwl is Here
i tried to reset it in recovery and made wipe data and wipe cash and made reboot
nothing happend same problem
i think my xoom bricked![]()
Last edited by ttxxaa; 02-11-2012 at 03:03 AM.
ok so you have already tried to wipe data.have you tried to reflash the factory image yet?
Never Fear the iOwl is Here
LG V60 Dual Screen
Note 10 Plus
OnePlus 7 Pro
i try to write the commands bet from the first line i get message
is not recognized as internal or external
command,
operable program or batch file
![]()
Make sure usb debugging is still checked. With that error your adb isn't set up correctly.
Setting up ADB on Windows 7 64 bit (and other Windows platforms)
LG V60 Dual Screen
Note 10 Plus
OnePlus 7 Pro
hello again
i got new problem
i flashed my xoom using adb by this way
after i flshed system.img i got erro message in my xoom ((failed to process command error 0x12003 ))PHP Code:
1. Download the EasyADB(SDK_Tools.zip): here
2. Extract the SDK_Tools.zip files
3. Copy SDK_Tools folder
4. Navigate to C: drive
5. Paste SDK Tools folder on root of C: drive
Download your image: here
Put the images in the SDK_Tools folder
Open command prompt in Windows Start icon (in search textfield type in cmd and press enter)
Once command prompt pop up,type:
cd C:\SDK_tools
adb reboot bootloader
>>>> Xoom will then reboot into bootloader screen
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
Use volume rocker to select ok and then xoom will reboot.
At this point you should be back to a factory state which includes being locked and unrooted.
when continued the steps the device didnt boot and gave me message ((faild to boot LNX 0x0004 starting rsd mode 2 ))
now i cant do the fastboot![]()
You have to reboot the Xoom to get it recognized again and reboot your PC too. Also redownload your images from here to make sure you didn't get a bad download.
LG V60 Dual Screen
Note 10 Plus
OnePlus 7 Pro