un-root and locking my xoom wi-fi(Bricked)

[efid845]

Hi!
I have Motorola XOOM Wi-Fi MZ604.
i am trying to un root my xoom,and lock him.
i found a guide in XDA,and done every thing that the guide said,and i think that i have bricked the device:
when i'm turning on xoom,the is a message:
" Failed image LNX 0x0002
Starting RSD mode 2."

what should i do?

some information about my xoom:
He wa with ROM tiamat 2.2.2.
I wanted to un root him,so i downloaded my stock image from moto-dev website.
i have seen on XDA tip for un-brick xoom:
Install RSD lite and download some SBF file.
how to do it?
I've downloaded every thing,but i dont have any idea how use this software.

[Ads]

[ggrant3876]

Unplug your Xoom and reboot the Xoom and your PC and adb should see it. Get your images to return to stock from here. The instructions are on the upper right of the page.

[efid845]

thanks

[fish1552]

Yes, do NOT use the RSD Lite method to return to stock. Those files are for 3G versions of the device and will totally mess up your device.

[moosc]

I know old thread but I got same message
failed image lnx 0x0002 I've rebooted both PC and xoom. I got adb up running it says no device. If I start the flashing process it just says waiting for device.
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk

[Astrix]

I know old thread but I got same message
failed image lnx 0x0002 I've rebooted both PC and xoom. I got adb up running it says no device. If I start the flashing process it just says waiting for device.

Can you get to "Starting fastboot protocol"?

- Try to fastboot/push images from there.
- Use USB port that direct from your PC, usual at the back of your PC.

Hope it help

[moosc]

I tried but I get waiting for device

Can you get to "Starting fastboot protocol"?

- Try to fastboot/push images from there.
- Use USB port that direct from your PC, usual at the back of your PC.

Hope it help

Sent from my Galaxy Nexus using Xparent Cyan Tapatalk

[ggrant3876]

I tried but I get waiting for device



Sent from my Galaxy Nexus using Xparent Cyan Tapatalk

Are you sure you have usbdebugging checked? Make sure you're using the cable that came with the xoom and as Astrix suggested try different usb ports.
Ways to get Windows to recognize your Xoom

[moosc]

I can't get in to check if USB debugging is checked. I can pull stuff the SD card plugged in.

Are you sure you have usbdebugging checked? Make sure you're using the cable that came with the xoom and as Astrix suggested try different usb ports.
Ways to get Windows to recognize your Xoom

Sent from my Galaxy Nexus using Xparent Cyan Tapatalk

[ggrant3876]

I can't get in to check if USB debugging is checked. I can pull stuff the SD card plugged in.



Sent from my Galaxy Nexus using Xparent Cyan Tapatalk

What exactly were you doing when this happened?