Can't Boot or get to Clockwork Recovery Stuck at Red M Logo. Fastboot Works. Help.

[brokenrhino]

4g lte xoom no data package
I am stuck at the red motorola logo.
I did universal Root Method.
Then Had root access I then used rom manager to download and install EOS ICS and then it went bad.
First time it booted fine but the activation screen was replaced by the unlock screen and then it wouldn't unlock for me. So I rebooted and then on I am stuck at the red motorola screen. I did backups but I can't get into recovery. I can get to fast boot but no luck on recovery.
I installed it using clock work manager. Did all the wipes. 4g lte xoom no data package.
Please help me.

When I try to go into Recovery. Power+vol Up Reboot wait 3 secs then vol down. Select Android Recovery with vol up. Then it says:
--> Android Recovery
Entering Android Reovery Mode
Reading ODM fuse: 0

No clue what that means. It is frustrating. I have fastboot access but I can't get it to boot. Do I have to go back to stock. How do I do that. I just wish I could flash my backup. ugh.

Edit: Fixed it see me post at the bottom. Thank you 1.35 Everest Bootloader.

[Ads]

[Castorshells]

Don't use Rom manager for downloading and installing. Download on PC or Xoom from site then flash through recovery.

As for getting you back I am not sure why it won't let you back in recovery. I'm sure someone will be able to help soon.

[ggrant3876]

4g lte xoom no data package
I am stuck at the red motorola logo.
I did universal Root Method.
Then Had root access I then used rom manager to download and install EOS ICS and then it went bad.
First time it booted fine but the activation screen was replaced by the unlock screen and then it wouldn't unlock for me. So I rebooted and then on I am stuck at the red motorola screen. I did backups but I can't get into recovery. I can get to fast boot but no luck on recovery.
I installed it using clock work manager. Did all the wipes. 4g lte xoom no data package.
Please help me.

When I try to go into Recovery. Power+vol Up Reboot wait 3 secs then vol down. Select Android Recovery with vol up. Then it says:
--> Android Recovery
Entering Android Reovery Mode
Reading ODM fuse: 0

No clue what that means. It is frustrating. I have fastboot access but I can't get it to boot. Do I have to go back to stock. How do I do that. I just wish I could flash my backup. ugh.

Welcome to the forum.Glad you decided to join us. Make sure you have a full battery charge and try again. As Castorshells said the Xoom doesn't need Rom Manager for anything, don't ever use it to update the recovery. There are only two recoveries compatible with the Xoom, the one you flashed from Universal Root and the Rogue Recovery. If you can use fastboot you might do the recovery again, probably won't be able to get your nandroid back. If you can get a new recovery you can reflash the rom and the gapps package after your wipes.

[brokenrhino]

I have tried reflashing the Tiamat recovery a dozen or so times. Not Working. Says it wrote it to StorMgr partition - Done. But then I got to boot into it and I still get This:
--> Android Recovery
Entering Android Reovery Mode
Reading ODM fuse: 0

I learned that Rom Manager doesn't work a little too late. That was the big mistake I made. I don't know why it can't get into recovery. So anoying. I am going to try to do the Relock instructions and then start over.

Is this what you guys think I should do?
Thanks for your help guys.

Download the files from the Motorola site.
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
fastboot reboot (loads of praying, maybe a sacrifice or two)

Then Start again(not touching rom manager this time)

[ggrant3876]

That might be your best bet.

[brokenrhino]

Also ADB commands dont work but Fastboot ones do work. Weird.
I tryed to do another unlock after this happened and it went through but still wouldn't boot. Could my problem be that After I did that I am not in debugging mode anymore?

[brokenrhino]

Tried all that and each step it said that it worked and now it is still stuck at the red batwings logo. ugh.

[NewAge]

As soon as the red M shows up wait 3 seconds and hold volume down until Android Recovery show up in the top left. Then hit volume up. Select wipe data factory reset, wipe cache and wipe dalvik cache and reboot.

That work?

[brokenrhino]

I fixed it!!!
I was about to give up and then I had a crazy idea to SBF the 1.35 Everest Bootloader. And it Worked. The thing booted right up into 3.2.2. Then What did I do after sweating that my wife would find out that I fried our $500 tablet? Did I leave it alone, nope. I started rooting all over again. This time with a lot more knowledge. Now It is running Team EOS 1.0 4.0.3. And it runs great.

Thanks for all your help everyone.

[magpiemini]

As soon as the red M shows up wait 3 seconds and hold volume down until Android Recovery show up in the top left. Then hit volume up. Select wipe data factory reset, wipe cache and wipe dalvik cache and reboot.

That work?

Not for me, when Android Recovery shows up it immediately says then I get a pretty green android with an explanation mark on his tummy then I hit up and down several times then I got the menu to select wipe data factory reset, then wipe cache partition but no wipe dalvik cache. Rebooted but it still is stuck on the red M.