Replaced Digitizer

[Tezumek]

Hi all,
I am new to the forums so hopefully this is the right spot. I recently had to replace my digitizer due to dog issues. I just finished the replacement and now I cannot get the xoom to boot. Any suggestions? I rechecked my connections and let it charge for a couple of minutes prior to trying to restart. I have held the power button down with the volume up and seem to find no response. The only thing that didnt go perfectly were a couple of the ribbon connectors were particularly hard to get out and back in. Those were the two beside the speakers (not the speakers themselves). I have been unable to locate a diagram showing what those two are responsible for but any help would be appreciated.

[Ads]

[Castorshells]

I'm not familiar with the internals, but I would say its best to have everything back the way it was.

Does your charge light come on? Let it charge to green and try again.

[Tezumek]

The light comes on with no problem. Its currently white, but I will wait until green and see what happens.

[ggrant3876]

Hi all,
I am new to the forums so hopefully this is the right spot. I recently had to replace my digitizer due to dog issues. I just finished the replacement and now I cannot get the xoom to boot. Any suggestions? I rechecked my connections and let it charge for a couple of minutes prior to trying to restart. I have held the power button down with the volume up and seem to find no response. The only thing that didnt go perfectly were a couple of the ribbon connectors were particularly hard to get out and back in. Those were the two beside the speakers (not the speakers themselves). I have been unable to locate a diagram showing what those two are responsible for but any help would be appreciated.

Welcome to the forum. Glad you decided to join us.

Motorola Xoom Teardown - iFixit



See if either of these will help you.